發布時間: 2022-06-26 點擊次數: 653次
表面電阻測試儀用于測量所有導電型、抗靜電型及靜電泄放型表面的阻抗或電阻。使用容易,高品質,高可靠度,該儀表還可測量影響電性能的相對濕度和溫度。同時儀器體積小、重量輕、本儀器具有精度高、顯示迅速、性好穩定、讀數方便等優點。
表面電阻測試儀產品優勢:
測量標度為10伏/100伏,適合于標準規定的工作臺面和地面。
統一使用塑料儀表保護箱包裝,防止儀表受損。
重量輕,攜帶方便。含有液晶數碼顯示屏,容易使用,讀數方便,
有自動斷電功能,延長電池使用壽命,
自動歸零,隨時保證每次測量的精度,
底部平行電極磁條加上5磅重錘探頭及內置阻抗探頭,測量數據更加準確。
表面電阻測試儀測試前的準備工作有哪些?
1,將電源插頭插入儀器背面的電源插座,電源開關置于斷開位置;
2,工作方式開關置于"短路"位置,電流開關處于彈出位置;
3,將手動測試架的屏蔽線插頭與電氣箱的輸入插座連接好;
4,對測試樣品進行一定的處理(如噴沙,清潔等);
5,調節室內溫度及濕度使之達到測試要求。
6,要注意測試過程中不能觸摸微電流測試端:微電流測試端怕受到大電流或人體感應電壓及靜電的沖擊。所以在開機后和測試過程中不能與微電流測試端接觸,以免損壞儀表。